Jabsco Marine Spare Valvles Kit SPARE VALVLES KIT
Spare valvles kit
Showing 65–96 of 418 results
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
Self-priming reversible electric pump, bronze gears for oil and diesel transfer, 12 and 24V.The electronic control adjust speed to the liquid viscosity. Automatic lock system when the pump has run out of liquid.The built-in keypad can set the motor speed, can stop/start the pump and reverse its flow.
Float switch for bilge pumps. Dimensions 127x42x110 mm
Compact electronic unit for oil change for fixed installation on vessels. Used to drain and fill up all onboard applications such as generators, engines, gear drive and gangplanks.Electronic control adjusts the pump motor speed depending on the oil viscosity/temperature and increases revolutions during priming for maximum suction.The system automatically stops working when it runs out…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Ideal for washdown operations with fresh and salt water.Includes:- high-pressure self-priming electropump- 15-m extensible hose- snap-in spray nozzle, jet lock, check valve and trigger to adjust the flow.
Impeller of special nitril rubber. Original spare part for UP1 UP1-M and UP1/AC. Dimensions: 22 x � 51.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
Self-priming electric pump with bronze gears for oil transfer. Protection strainer included.
8-mm and 6-mm rigid rilsan pipe kit for tapping through the dipstick. For pump models 16.190.xx.
Self-priming electric pumpPTFE with bronze gears and for the transfer gasoline non-flammable liquids. Complete with in-line filter brass body. Self priming mt. 1 5. Not for oil.
Self-priming autoclave pump with two electronically controlled electric pumps. Motor speed in relation to the required flow rate. Reduced consumption and noise. They eliminate the expansion tank. Self-protected against voltage overloads. The operating status of the pump can be monitored by means of 2 luminous LEDs. End of water block device.
Pump with bronze gears for diesel transfer equipped with an ELECTRONIC CONTROL panel which guarantees the reversibility of the flow direction the variable speed of the engine in relation to the viscosity of the liquid and the automatic locking at the end of emptying. Complete kit with pliers protection fuse accessories and 20 mm screened…
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
Lewmar Fiberglass Thruster Tunnel LEWMAR fiberglass tunnel 300x1500 mm
1 × 829,00 €
Tufnol Hye Block Tufnol HYE block 1 pulley 14x50mm EB
1 × 38,00 €
Champion Spark-plugs Spark plug Champion J6C
1 × 8,00 €
Osculati Smooth Pipe For Fuel A1 fuel hose smooth 25 x 35.5 mm
1 × 495,00 €
Osculati Self-adhesive Plastic Letters Targa Self-adhesif plastic D white 20cm
1 × 11,00 €
Osculati Guardian Rpm Counter Guardian RPM counter diesel white w/hourmeter 12 V
1 × 145,00 €
Osculati Self-adhesive Plastic Letters Targa Self-adhesif plastic G white 20cm
1 × 11,00 €
Osculati Polypropylene Hose Adaptors PP male hose adaptor 1inch 1/4 x 30 mm
1 × 24,00 €
Osculati High-strength 3-strand Polyester Line 3-strand line black 28 mm
1 × 664,00 €
Osculati Skin Fitting Nylon skin fitting 2inch 50 mm w/SS head 90° adaptor
1 × 27,00 €
Lewmar Fiberglass Thruster Tunnel LEWMAR fiberglass tunnel 185x2000 mm
1 × 544,00 €
Rule 3700 And 4000 Extra-large Submersible Pump Rule 3700 large submersible pump 24V 7A 38mm
1 × 330,00 €
Princeton Tec 40 Torchipx8 Underwater PRINCETON Tec 40 torch, IPX8 underwater
1 × 37,00 €
Osculati Belts With Shackle 7.5 m nylon winch strap+shackle
1 × 29,00 €
Patented Cables Series Ultraflex Machtm Cable MACH5 11
1 × 71,00 €
Osculati Self-adhesive Plastic Letters Targa Self-adhesif plastic X black 20cm
1 × 11,00 €
Osculati High-strength 3-strand Polyester Line 3-strand white line 40 mm
1 × 1.029,00 €
Osculati Built-in Side Navigation Lights Made Of Abs Built-in ABS navigation light green/black
1 × 26,00 €
Jabsco Washdown Par-max 6 Plus Pump Kit Autoclave HotShot 6HD 12v 70psi
1 × 385,00 € Subtotal: 4.714,00 €