Jabsco Marine Spare Valvles Kit SPARE VALVLES KIT
Spare valvles kit
Showing 65–96 of 418 results
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
Self-priming reversible electric pump, bronze gears for oil and diesel transfer, 12 and 24V.The electronic control adjust speed to the liquid viscosity. Automatic lock system when the pump has run out of liquid.The built-in keypad can set the motor speed, can stop/start the pump and reverse its flow.
Float switch for bilge pumps. Dimensions 127x42x110 mm
Compact electronic unit for oil change for fixed installation on vessels. Used to drain and fill up all onboard applications such as generators, engines, gear drive and gangplanks.Electronic control adjusts the pump motor speed depending on the oil viscosity/temperature and increases revolutions during priming for maximum suction.The system automatically stops working when it runs out…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Ideal for washdown operations with fresh and salt water.Includes:- high-pressure self-priming electropump- 15-m extensible hose- snap-in spray nozzle, jet lock, check valve and trigger to adjust the flow.
Impeller of special nitril rubber. Original spare part for UP1 UP1-M and UP1/AC. Dimensions: 22 x � 51.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
Self-priming electric pump with bronze gears for oil transfer. Protection strainer included.
8-mm and 6-mm rigid rilsan pipe kit for tapping through the dipstick. For pump models 16.190.xx.
Self-priming electric pumpPTFE with bronze gears and for the transfer gasoline non-flammable liquids. Complete with in-line filter brass body. Self priming mt. 1 5. Not for oil.
Self-priming autoclave pump with two electronically controlled electric pumps. Motor speed in relation to the required flow rate. Reduced consumption and noise. They eliminate the expansion tank. Self-protected against voltage overloads. The operating status of the pump can be monitored by means of 2 luminous LEDs. End of water block device.
Pump with bronze gears for diesel transfer equipped with an ELECTRONIC CONTROL panel which guarantees the reversibility of the flow direction the variable speed of the engine in relation to the viscosity of the liquid and the automatic locking at the end of emptying. Complete kit with pliers protection fuse accessories and 20 mm screened…
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
Osculati Fixed Brackets For Transom Mounting Fixed brackets for transom mounting
1 × 98,00 €
Osculati Stainless Steel Conical Flagstaffs SS flagstaff 25 x 1200 mm
1 × 69,00 €
Head-head Power Joint Copper end-to-end joint 40.5 mm 35 mm sq.
1 × 6,00 €
Osculati Protection Tabs For Skin Fittingspetrol Ventswater Etc SS protection tabs 57x54x16 mm
1 × 6,00 €
Osculati Brass T Connectors Brass T-fitting 1/4inch
1 × 8,00 €
Osculati Tap-caps Tap-Caps
1 × 115,00 €
Osculati Aisi316 Stainless Steel Cast Hook Polished SS hook 29x32 mm
1 × 9,00 €
Carling Technologies Carling Switch Contura Ii Switch ON-OFF-(ON) switch 2 LED 12 V
1 × 18,00 €
Osculati Drop Nose Pins Drop nose pin AISI 316 50 mm Ø 10 mm A
1 × 21,00 €
Osculati Marine Electric Cable Made Of Copper And Coated With Extra-insulating Pvc Copper cable grey 1.5 mm sq. 100 m
1 × 66,00 €
Polyform Nf Series Fender Fender NF-4 Black
1 × 39,00 €
Transducers And Sensors For Raymarine Instruments Raymarine E26008 transducer
1 × 150,00 €
Osculati Sanshin Swivelling Light With Electric Control Sanshin swivelling light 24 V 55 W
1 × 1.809,00 €
Patented Cables Series Ultraflex Machtm Cable MACH5 14
1 × 78,00 €
Carling Technologies Toggles With Lighted Symbols Toggle w/lighted symbols Navigation lights C
1 × 8,00 €
Osculati Reels Of High-strength Polypropylene Braid Reel of polypropylene braid, green 3 mm x 17 m
1 × 11,00 €
Osculati Corner Roller Fairlead Angle fairlead w/rollers 100°
1 × 200,00 €
Osculati Hinged Bow Roller With Fairlead Up To 20 Kg Hinged bow roller with fairlead up to 20 kg
1 × 295,00 €
- Blown Polyethylene Buoys Buoy 10l-floating yellow
1 × 13,00 €
Viadana Stainless Steel Toggle Fastener For Peaks Stainless steel toggle fastener for peaks
1 × 14,00 €
Heater Craft 3-outlet Centralized Heater HEATER CRAFT centralised heater 40000 BTU 24V 3B
1 × 889,00 €
Carling Technologies Carling Switch Contura Ii Switch (ON)-OFF-(ON) switch red LED 24 V
1 × 20,00 €
Osculati Underwater Light With Stud For Hull / Transom / Platform Underwater light w/12x3W blue LEDs with studs
1 × 584,00 €
Osculati Spare Aisi316 Stainless Steel Sheave For Rollers SS spare pulley for 01.336.01/03
1 × 84,00 €
Osculati 12v Oil Change Kit 12V oil change kit
1 × 225,00 €
Whale Flipper Mk4 Hand Pump WHALE Flipper MK4 hand pump
1 × 135,00 €
Osculati Vertical 5-hole Level Sensor With S5 Flange SS 316 vertical level sensor 240/33 ohm 65 cm
1 × 50,00 €
Tufnol Hye Block HYE double clam cleat + becket + cam C
1 × 130,00 €
Osculati Seat Frame Seat frame only for 48.680.08
1 × 68,00 €
Marco Self-priming Bilge Pump Marco self-priming bilge pump 24 V 45 l/m
1 × 165,00 € Subtotal: 5.383,00 €