Jabsco Marine Spare Valvles Kit SPARE VALVLES KIT
Spare valvles kit
Showing 65–96 of 418 results
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
Self-priming reversible electric pump, bronze gears for oil and diesel transfer, 12 and 24V.The electronic control adjust speed to the liquid viscosity. Automatic lock system when the pump has run out of liquid.The built-in keypad can set the motor speed, can stop/start the pump and reverse its flow.
Float switch for bilge pumps. Dimensions 127x42x110 mm
Compact electronic unit for oil change for fixed installation on vessels. Used to drain and fill up all onboard applications such as generators, engines, gear drive and gangplanks.Electronic control adjusts the pump motor speed depending on the oil viscosity/temperature and increases revolutions during priming for maximum suction.The system automatically stops working when it runs out…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Ideal for washdown operations with fresh and salt water.Includes:- high-pressure self-priming electropump- 15-m extensible hose- snap-in spray nozzle, jet lock, check valve and trigger to adjust the flow.
Impeller of special nitril rubber. Original spare part for UP1 UP1-M and UP1/AC. Dimensions: 22 x � 51.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
Self-priming electric pump with bronze gears for oil transfer. Protection strainer included.
8-mm and 6-mm rigid rilsan pipe kit for tapping through the dipstick. For pump models 16.190.xx.
Self-priming electric pumpPTFE with bronze gears and for the transfer gasoline non-flammable liquids. Complete with in-line filter brass body. Self priming mt. 1 5. Not for oil.
Self-priming autoclave pump with two electronically controlled electric pumps. Motor speed in relation to the required flow rate. Reduced consumption and noise. They eliminate the expansion tank. Self-protected against voltage overloads. The operating status of the pump can be monitored by means of 2 luminous LEDs. End of water block device.
Pump with bronze gears for diesel transfer equipped with an ELECTRONIC CONTROL panel which guarantees the reversibility of the flow direction the variable speed of the engine in relation to the viscosity of the liquid and the automatic locking at the end of emptying. Complete kit with pliers protection fuse accessories and 20 mm screened…
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
Osculati Classic 12 Navigation Lights Classic 12 white/white stern navigation light
1 × 24,00 €
Osculati Black Polycarbonate Hose Adaptors Male hose adapter black polycarbonate 1/2inch
1 × 6,00 €
Champion Spark-plugs Spark plug Champion RV8C
1 × 9,00 €
Carling Technologies Carling Switch Contura Ii Switch (ON)-OFF-(ON) switch red LED 24 V
1 × 20,00 €
Lewmar D2 Clutch Stopper D2 double x rope 12-14
1 × 285,00 €
Tufnol Hye Block Tufnol HYE block 2 pulleys 16x60mm TB
1 × 73,00 €
Bennett Spare Parts Solenoid valve for Benner red wire 24 V
1 × 115,00 €
Carling Technologies Carling Switch Contura Ii Switch ON-OFF switch 24 V
1 × 17,00 €
Osculati Underwater Led Light For Gangplanksupper Sterns And Bottoms Underwater spot light w/ 4 RGBW LEDs
1 × 455,00 €
Cylinder For Vetus Steering System Cylinder for VETUS steering system MTC175
1 × 599,00 €
Osculati Scuba Diving Flag Scuba diving flag 20 x 30 cm
1 × 11,00 €
Osculati Pipe Anodized aluminium pipe 20 x 1 mm x 2 m
1 × 15,00 €
Champion Spark-plugs Spark plug Champion QL87YC
1 × 10,00 €
Raymarine I50 / I60 Instruments Raymarine i50 Speed digital display
1 × 549,00 €
Lenco Trim Tab Kit - Standard Installation Lenco Standard trim tab kit 305 x 457 mm
1 × 904,00 €
Osculati Shackle With Allen-head Recessed Pin Anchor shackle AISI 316 14 mm
1 × 19,00 €
Osculati French Flag Kit Special flags France 3a 4a 5a
1 × 26,00 €
Easylock Maxi Stopper EASYLOCK maxi single
1 × 225,00 €
Bennett Release Relay Rm 12 Relay RM12
1 × 175,00 €
Tufnol Hye Block Tufnol HYE block 1 pulley 14x50mm LB
1 × 42,00 €
Transducers And Sensors For Raymarine Instruments Raymarine Wind T120 wireless transducer
1 × 669,00 €
Tufnol Hye Block Tufnol HYE block 2 pulleys 14x50mm TB
1 × 56,00 €
Osculati Pulpit Joint Pulpit T-joint 90° 30 mm
1 × 27,00 €
Osculati Drop Nose Pins Drop nose pin AISI 316 60 mm Ø 10 mm A
1 × 21,00 €
Pfeiffer Spinnaker Pole End Spinnaker pole end 40 x 2 mm
1 × 69,00 €
Patented Cables Series Ultraflex Machtm Cable MACH36 28
1 × 120,00 €
Osculati Bilge Sentidek Cleaner Bilge Sentideck cleaner 5 l
1 × 32,00 €
Osculati Internal 90° Swivelling Joints Internal 90° swivelling joint 20x1.2 mm
1 × 14,00 €
Osculati Soft Foam Key Ringanchor Model Customized key ring 4-colour print
1 × 11,00 €
Osculati Female/female Ball Valve Polypropylene/nylon ball valve 1inch 1/4
1 × 13,00 €
Osculati Self-adjusting Spreader Boots With Aerodynamic Profile Spreader boot 8 mm
1 × 42,00 €
Osculati Hard Rubber Spare Sheave For Rollers Spare pulley for bow roller
1 × 20,00 €
Osculati Halogen Bulb JC Halogen bulb G4 12 V 10 W
1 × 23,00 €
Marco Oil Change Kit With Bronze Gears Marco oil changing kit bronze gears 12 V
1 × 180,00 € Subtotal: 4.876,00 €