Jabsco Marine Spare Valvles Kit SPARE VALVLES KIT
Spare valvles kit
Showing 65–96 of 418 results
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards.Fitted with 1/2 snap fittings.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle.
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
It is connected to the toilet unit or to the waste water tanks, is used to drain toilet units or tanks. Virtually unblockable, can run dry, self priming and can be also be used with vacuum toilet units. Materials: nylon/fibreglass + Hypalon rubber + brass + stainless steel. Maximum suction and head of 3 metres,…
Self-priming reversible electric pump, bronze gears for oil and diesel transfer, 12 and 24V.The electronic control adjust speed to the liquid viscosity. Automatic lock system when the pump has run out of liquid.The built-in keypad can set the motor speed, can stop/start the pump and reverse its flow.
Float switch for bilge pumps. Dimensions 127x42x110 mm
Compact electronic unit for oil change for fixed installation on vessels. Used to drain and fill up all onboard applications such as generators, engines, gear drive and gangplanks.Electronic control adjusts the pump motor speed depending on the oil viscosity/temperature and increases revolutions during priming for maximum suction.The system automatically stops working when it runs out…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Double version with two electronically-operated pumps working in parallel.If one of the pumps breaks down, water delivery isn’t cut off because the other pump is still operating.Motor speed adapting to the flow. Reduced current draw and noise levels.No accumulator tank.Fitted with overvoltage protection device and a locking system against dry running.The pump operation can be…
Ideal for washdown operations with fresh and salt water.Includes:- high-pressure self-priming electropump- 15-m extensible hose- snap-in spray nozzle, jet lock, check valve and trigger to adjust the flow.
Impeller of special nitril rubber. Original spare part for UP1 UP1-M and UP1/AC. Dimensions: 22 x � 51.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
Self-priming electric pump with bronze gears for oil transfer. Protection strainer included.
8-mm and 6-mm rigid rilsan pipe kit for tapping through the dipstick. For pump models 16.190.xx.
Self-priming electric pumpPTFE with bronze gears and for the transfer gasoline non-flammable liquids. Complete with in-line filter brass body. Self priming mt. 1 5. Not for oil.
Self-priming autoclave pump with two electronically controlled electric pumps. Motor speed in relation to the required flow rate. Reduced consumption and noise. They eliminate the expansion tank. Self-protected against voltage overloads. The operating status of the pump can be monitored by means of 2 luminous LEDs. End of water block device.
Pump with bronze gears for diesel transfer equipped with an ELECTRONIC CONTROL panel which guarantees the reversibility of the flow direction the variable speed of the engine in relation to the viscosity of the liquid and the automatic locking at the end of emptying. Complete kit with pliers protection fuse accessories and 20 mm screened…
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
Maxi Pump Whale Whale Henderson maxi pump 136 l/min
1 × 544,00 €
Cem Elettromeccanica Self-priming Electric Pump Selfpriming elect.pump 24V50l
1 × 569,00 €
Rule Mate Automatic Bilge Pump Rule Mate automatic bilge pump 97 l/min 12 V
1 × 300,00 €
Osculati Fastening Platesangle Emossed Version Square embossed plate w/left pin
1 × 17,00 €
Osculati Bayonet Flush Fitting For Washdown Spare plastic straight fitting
1 × 19,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, black 4 mm
2 × 559,00 €
Marco Self-priming Bronze Electric Gear Pump For Diesel Oilantifreeze And Water Transfer Self-priming electric pump 24 V 26 l/min
1 × 215,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, black 10 mm
1 × 1.494,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, red 5 mm
1 × 789,00 €
Marlow Marlowbraid Ropesolid Colour Marlow Marlowbraid line, red 12 mm
1 × 1.004,00 €
Flojet Docking Hose Connector And Water Pressure Reducer Flojet in line water pressure reducer
1 × 43,00 €
Jabsco Washdown Par-max 6 Plus Pump Kit Autoclave HotShot 6HD 24v 70psi
1 × 395,00 €
Marlow Marlowbraid Ropesolid Colour Marlow Marlowbraid line, blue navy 12 mm
2 × 1.004,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, blue 4 mm
1 × 559,00 €
Osculati Steel Ball For Snap Mounting Of Gas Springs Steel ball for snap mounting of gas springs
1 × 8,00 €
Marco Self-priming Bilge Pump Marco self-priming bilge pump 24 V 45 l/m
1 × 165,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, blue 3 mm
1 × 355,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, white 5 mm
2 × 759,00 €
Osculati Abs Louver ABS louvred vent black 201x101 mm
1 × 8,00 €
Macerating Pumps For Toilet Units Whale Gulper Maintenance kit for Whale Gulper macerator
1 × 49,00 €
Jabsco Dimond V-flo 5 Fresh Water Pump Autoclave V-flo 5.0 12v 40psi
1 × 435,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, black 6 mm
1 × 1.029,00 €
Osculati Flat Fastening Plates90° Version Compact 90° plate 10mm external
1 × 12,00 €
Osculati Openable Cover For Bilge Pump Automatic Switches Openable cover for automatic switches
1 × 19,00 €
Marlow D12 Braid Without Cover Marlow Excel D12 braid, red 2.5 mm
1 × 285,00 €
Macerating Pumps For Toilet Units Whale Gulper Whale Gulper macerating pump 12 V
1 × 450,00 € Subtotal: 13.407,00 €