Head-head Power Joint Copper end-to-end joint 32.5 mm
6,00 €Made of high conductivity tin-plated copper
Showing 3009–3040 of 21730 results
-
-
Head-head Power Joint Copper end-to-end joint 35.5 mm
6,00 €Made of high conductivity tin-plated copper
-
Head-head Power Joint Copper end-to-end joint 40.5 mm 35 mm sq.
6,00 €Made of high conductivity tin-plated copper
-
Head-head Power Joint Copper end-to-end joint 40.5 mm 50 mm sq.
7,00 €Made of high conductivity tin-plated copper
-
Head-head Power Joint Copper end-to-end joint 45.5 mm
8,00 €Made of high conductivity tin-plated copper
-
Head-head Power Joint Copper end-to-end joint 50.5 mm
8,00 €Made of high conductivity tin-plated copper
-
Heat-resistant Clamps For High Temperatures Heat-resistant clamp 140 mm
10,00 €Made of nylon and special additives, these clamps resist up to 125°C continuous and to 145°C for short periods. Greenish neutral colour depending on their heat resistance.
-
Heat-resistant Clamps For High Temperatures Heat-resistant clamp 200 mm
13,00 €Made of nylon and special additives, these clamps resist up to 125°C continuous and to 145°C for short periods. Greenish neutral colour depending on their heat resistance.
-
Heat-resistant Clamps For High Temperatures Heat-resistant clamp 290 mm
18,00 €Made of nylon and special additives, these clamps resist up to 125°C continuous and to 145°C for short periods. Greenish neutral colour depending on their heat resistance.
-
Heat-resistant Clamps For High Temperatures Heat-resistant clamp 365 mm
34,00 €Made of nylon and special additives, these clamps resist up to 125°C continuous and to 145°C for short periods. Greenish neutral colour depending on their heat resistance.
-
Heat-resistant Clamps For High Temperatures Heat-resistant clamp 98 mm
8,00 €Made of nylon and special additives, these clamps resist up to 125°C continuous and to 145°C for short periods. Greenish neutral colour depending on their heat resistance.
-
Heat-shrink Sheaths Made Of Reticular Polyolefinwatertight Heat-shrinkable sheath 12 mm
53,00 €Equipped with internal thermo-shrinkable adhesive allowing to wrap up and waterproof the internal components. 3:1 shrinkage rate. Black colour.
-
Heat-shrink Sheaths Made Of Reticular Polyolefinwatertight Heat-shrinkable sheath 18 mm
53,00 €Equipped with internal thermo-shrinkable adhesive allowing to wrap up and waterproof the internal components. 3:1 shrinkage rate. Black colour.
-
Heat-shrink Sheaths Made Of Reticular Polyolefinwatertight Heat-shrinkable sheath 24 mm
53,00 €Equipped with internal thermo-shrinkable adhesive allowing to wrap up and waterproof the internal components. 3:1 shrinkage rate. Black colour.
-
Heat-shrink Sheaths Made Of Reticular Polyolefinwatertight Heat-shrinkable sheath 6 mm
53,00 €Equipped with internal thermo-shrinkable adhesive allowing to wrap up and waterproof the internal components. 3:1 shrinkage rate. Black colour.
-
Heat-shrink Sheaths Made Of Reticular Polyolefinwatertight Heat-shrinkable sheath 9 mm
53,00 €Equipped with internal thermo-shrinkable adhesive allowing to wrap up and waterproof the internal components. 3:1 shrinkage rate. Black colour.
-
Heater Craft 12v Defroster/defogger Unit 12V defroster/defogger unit
435,00 €To be installed inside the control panel to defrost or defog the glass panes in wintertime.
-
Heater Craft 2-outler Centralized Heater HEATER CRAFT 2-outler centralized heater
659,00 €Mounting is possible where needed. Two 75-mm Ø hoses connect to two adjustable outlets for bulkhead mounting. Same technical features as model 50.263.00. The kit includes a heater, a 4-position switch panel, mounting bracket, 3.6-m hose, 2 outlets, electrical cable and screws.The system exploits the engine cooling water to convey heat to the cabin. 3-speed…
-
Heater Craft 3-outlet Centralized Heater HEATER CRAFT centralised heater 40000 BTU 12V 3B
759,00 €Upgraded model similar to 50.263.01. Three hoses connect to three adjustable outlets. The kit includes a heater, a 4-position switch panel, mounting bracket, 5.4-m 75-mm Ø hose, 3 adjustable outlets, electrical cable and screws. The system exploits the engine cooling water to convey heat to the cabin. 3-speed motor, simple and fast mounting.
-
Heater Craft 3-outlet Centralized Heater HEATER CRAFT centralised heater 40000 BTU 24V 3B
889,00 €Upgraded model similar to 50.263.01. Three hoses connect to three adjustable outlets. The kit includes a heater, a 4-position switch panel, mounting bracket, 5.4-m 75-mm Ø hose, 3 adjustable outlets, electrical cable and screws. The system exploits the engine cooling water to convey heat to the cabin. 3-speed motor, simple and fast mounting.
-
Heater Craft Bulkhead Heater HEATER CRAFT bulkhead heater
559,00 €The kit includes a heater, a 4 position panel switch, electrical cable and screws. The system exploits the engine cooling water to convey heat to the cabin. 3-speed motor, simple and fast mounting.
-
Heavy Tug High-efficiency Dual-cone Drogue (floating Anchor) Heavy Tug HT 24 L dual-cone drogue
The dual-cone profile increases the seabrake efficiency as the sea strength increases. Water goes out through the drain plug between the cones thus keeping the trim constant. Made with ultra sturdy materials.Possible uses: floating anchor, anti-gliding anchor, reduces broaching, anti-rolling when at anchor, stabilizes the boat on tow, reduces drifting, break, stabilizer, emergency steering system.It…
-
Heavy Tug High-efficiency Dual-cone Drogue (floating Anchor) Heavy Tug HT 30 L dual-cone drogue
The dual-cone profile increases the seabrake efficiency as the sea strength increases. Water goes out through the drain plug between the cones thus keeping the trim constant. Made with ultra sturdy materials.Possible uses: floating anchor, anti-gliding anchor, reduces broaching, anti-rolling when at anchor, stabilizes the boat on tow, reduces drifting, break, stabilizer, emergency steering system.It…
-
Heavy Tug High-efficiency Dual-cone Drogue (floating Anchor) Heavy Tug HT 48 L dual-cone drogue
The dual-cone profile increases the seabrake efficiency as the sea strength increases. Water goes out through the drain plug between the cones thus keeping the trim constant. Made with ultra sturdy materials.Possible uses: floating anchor, anti-gliding anchor, reduces broaching, anti-rolling when at anchor, stabilizes the boat on tow, reduces drifting, break, stabilizer, emergency steering system.It…
-
Heavy Tug High-efficiency Dual-cone Drogue (floating Anchor) Heavy Tug HT 60 L dual-cone drogue
The dual-cone profile increases the seabrake efficiency as the sea strength increases. Water goes out through the drain plug between the cones thus keeping the trim constant. Made with ultra sturdy materials.Possible uses: floating anchor, anti-gliding anchor, reduces broaching, anti-rolling when at anchor, stabilizes the boat on tow, reduces drifting, break, stabilizer, emergency steering system.It…
-
-
-
-
-
-
Helly Hansen Hh Chelsea Evo Hooded Softshell HH Chelsea Evo Hooded Softshell navy blue L
205,00 €Softshell fabric with membrane and fleece backing combined with back panel in 4-way stretch fabric gives you the ultimate Softshell Jacket. The 4-way stretch fabric is strategically placed across the upper back to maximize movability and comfort. The fabric ensures water and wind resistance while the lack of shoulder seams increases the water repellency. This…
-
Helly Hansen Hh Chelsea Evo Hooded Softshell HH Chelsea Evo Hooded Softshell navy blue M
205,00 €Softshell fabric with membrane and fleece backing combined with back panel in 4-way stretch fabric gives you the ultimate Softshell Jacket. The 4-way stretch fabric is strategically placed across the upper back to maximize movability and comfort. The fabric ensures water and wind resistance while the lack of shoulder seams increases the water repellency. This…