Osculati Fuel Pipe Fuel pipe without terminal joints 2 m
19,00 €Made with a special co-extruded hose with polyester reinforcements, 8×13-mm cross section, resistant up to 15 bar, includes oversized pump, suitable for unleaded petrol.
Showing 513–544 of 1108 results
Made with a special co-extruded hose with polyester reinforcements, 8×13-mm cross section, resistant up to 15 bar, includes oversized pump, suitable for unleaded petrol.
Made with a special co-extruded hose with polyester reinforcements, 8×13-mm cross section, resistant up to 15 bar, includes oversized pump, suitable for unleaded petrol.
Made of special technopolymer. Fitted with removable 6/8/10-mm Ø fittings.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Made of crosslinked polyethylene type-tested for petrol. Made in compliance with ISO 21487 standards, RINA CE certified. Equipped with European VDO 10-180 Ω level indicators, already installed and tested.
Fuel-Lock lets air but not fuel out. Fuel is locked inside by a trap system that removes marine pollution and streaks on the side.An internal bulkhead device also avoids water to reach the tank through the vent. Polished AISI 316 stainless steel external element, hydrocarbon-resistant copolymer polypropylene internal element.
The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
Made with long fibers in mixed cotton hemp and teflon with square sections to provide water-tightness on the propeller’s box shaft, for correct operation make sure that the packing is mounted in short slugs that form just one ring each.
Made with long fibers in mixed cotton hemp and teflon with square sections to provide water-tightness on the propeller’s box shaft, for correct operation make sure that the packing is mounted in short slugs that form just one ring each.
Made with long fibers in mixed cotton hemp and teflon with square sections to provide water-tightness on the propeller’s box shaft, for correct operation make sure that the packing is mounted in short slugs that form just one ring each.
Made of stainless steel with high-resistance technopolymer board.
Sold in blister pack.
Sold in blister pack.
Sold in blister pack.
Sold in blister pack.
Made of PVC, large capacity model, display blister pack.
Osculati Self-locking Roller SS roller for Bruce/Trefoil max 15 kg
1 × 375,00 €
Osculati Bow Roller For Dolphin Strikers SS bow roller for dolphin strikers
1 × 115,00 €
Osculati Light Alloy Bow Roller With Anchor Locker Kit Up To 10 Kg Light alloy bow roller with anchor locker kit up to 10 kg
1 × 145,00 €
Osculati Washer Aluminium washer 24x6.5
1 × 12,00 €
Osculati Bow Roller With Anchor Locker SS bow roller 340 mm
1 × 185,00 €
Osculati Inspection Trapdoor For Diesel Tanks Inspection trapdoor for diesel tanks
1 × 19,00 €
Osculati White Nylon Flat Eye Strap Belt nylon jumper 30 mm
1 × 15,00 €
Osculati Washer Magnesium ring anode Suzuki outboard eng. 4/300 HP
1 × 14,00 €
Osculati Collar Anode For Sail Drive VOLVO SeaDrive anode Ø105mm
1 × 40,00 €
Osculati Yamaha Aluminium Anode Leg 300/450 Hp YAMAHA Aluminium anode leg 300/450 HP
1 × 27,00 €
Osculati Washer Zinc ring anode 20x7 mm
1 × 13,00 €
Osculati U-shaped Anode For Outboard Motor 60/300 Hp U-shaped aluminium anode f. outboards 60/300 HP
1 × 28,00 €
Osculati Cooling Zinc Plug Zinc plug 18x1.50 Ø 15x35
1 × 32,00 €
Osculati Woollen Chafe Guard Woolen chafe guard for rope Ø 14/22 mm white
1 × 51,00 €
Osculati Universal Rod For Anode Legs 250/270/280 Aluminium rod anode Volvo Penta
1 × 26,00 €
Osculati Xdp/b Zinc Anode Leg Kit XDP/B zinc anode leg kit
1 × 40,00 €
Osculati Various Outboard Anodes Zinc anode for Honda outboard engines
1 × 13,00 €
Osculati Watertight Inspection Hatch With Quick Opening Inspection hatch AISI 316 passage 91 mm
1 × 60,00 €
Osculati Honda Fuel Hoses HONDA connector 10 mm
1 × 10,00 € Subtotal: 1.220,00 €