Uflex Faria Hours Counter HOUR COUNTER FROM 0 TO 10000 — CHROMED
12 vdc display with � 53 mm.
Showing 65–96 of 151 results
-
-
Uflex Faria Hours Counter HOUR COUNTER FROM 0 TO 10000 — WHITE
12 vdc display with � 53 mm.
-
Uflex Flojet Chromed Pressure Regulator FLOJET CHROMED PRESSURE REGULATOR
Pressure regulator flush bulkhead with swivel elbow exit. It allows you to connect the on-board system to the water supply of the port. It reduces and maintains the adjusted pressure to 3.1 bar to avoid damage to the system board and to the pumps. Dim. Mm. 130x130x88 prof. female input 3/4 1/2 male output.
-
Uflex Gas Spring GAS SPRINGS MM.257 OUTPUT 10 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.257 OUTPUT 5 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.365 OUTPUT 30 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.550 OUTPUT 10 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.550 OUTPUT 20 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.550 OUTPUT 40 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.600 OUTPUT 20 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.600 OUTPUT 30 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.600 OUTPUT 40 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring GAS SPRINGS MM.683 OUTPUT 50 KG.
Gas Springs for hatches and engine-room doors. Made with nitrided steel rod andpainted steel body. Resistant to the marine environment. Size: Length mm.550 Stroke mm.234 Output force Kg.40 � Cylinder mm.18 5 � Rod mm.8
-
Uflex Gas Spring Mounting Bracket GAS SPRING MOUNTING BRACKET
Gas Spring Mounting Bracket in polished stainless steel. Square bent bracket with reverse attachment point mm. 50 x 37 5
-
Uflex Gas Spring Mounting Bracket With Self-locking Nut GAS SPRING MOUNTING BRACKET WITH SELF-LOCKING NUT
Gas Spring Mounting Bracket in polished stainless steel with self-locking nut. Flat bracket.
-
Uflex Gas Springs Mm.180 GAS SPRINGS MM.180
Gas springs for small hatches lenght from 180 mm. (closed) to 270 mm. (open)
-
Uflex Joint Collector Madeof Lexan To Screw Plugs Joint colector made of Lexan 16/30 A
24,00 €It is required for connecting cables.
-
Uflex Joint Collector Madeof Lexan To Screw Plugs Joint colector made of Lexan 30/50 A
27,00 €It is required for connecting cables.
-
Uflex Joystick For Mt Trim Tabs BLACK JOYSTICK
Compact device with joystick control (patented). Includes auto line-up (function of automatic realignment of the tabs). Comes complete with connecting cables.
-
Uflex Joystick For Mt Trim Tabs CHROMED JOYSTICK
Compact device with joystick control (patented). Includes auto line-up (function of automatic realignment of the tabs). Comes complete with connecting cables.
-
Uflex Kit Compact 7k Conditioner KIT COMPACT 7K CONDITIONER
Compact Kit 7Kcompact dimensions and low weight made with stainless steel body and fan it offers the possibility of connecting up to three air hosesdirectly to the unit it can be installed on all types of boat.Supplied as standard with 2 pre-mounted exits it avoids the use of additional air dividers. Features1 – Units with…
-
Uflex Plastic Nipless PLASTIC NIPLESS
Nipless outlet conn. 3/4� inlet conn. 1/2� Essential to connectthe pressure regulator.
-
Uflex Powered Stay For Hatches Type Avdesigned For Heavy Loads Stay for hatches single 12 V 300 mm
509,00 €Body Ø 48 mm, maximum thrust for a single actuator: 120 kg, manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65, total or partial hatch opening in all…
-
Uflex Powered Stay For Hatches Type Avdesigned For Heavy Loads Stay for hatches single 12 V 450 mm
524,00 €Body Ø 48 mm, maximum thrust for a single actuator: 120 kg, manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65, total or partial hatch opening in all…
-
Uflex Powered Stay For Hatches Type Avdesigned For Heavy Loads Stay for hatches single 12 V 600 mm
539,00 €Body Ø 48 mm, maximum thrust for a single actuator: 120 kg, manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65, total or partial hatch opening in all…
-
Uflex Powered Stay For Hatches Type Avdesigned For Heavy Loads Stay for hatches single 24 V 300 mm
544,00 €Body Ø 48 mm, maximum thrust for a single actuator: 120 kg, manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65, total or partial hatch opening in all…
-
Uflex Powered Stay For Hatches Type Avdesigned For Heavy Loads Stay for hatches single 24 V 450 mm
559,00 €Body Ø 48 mm, maximum thrust for a single actuator: 120 kg, manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65, total or partial hatch opening in all…
-
Uflex Powered Stay For Hatches Type Avdesigned For Heavy Loads Stay for hatches single 24 V 600 mm
579,00 €Body Ø 48 mm, maximum thrust for a single actuator: 120 kg, manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65, total or partial hatch opening in all…
-
Uflex Powered Stay For Hatches Type Model Ulysses Designed For Light Loads Ulysses stay for hatches 12 V 180 mm
300,00 €Electrical linear single mounting stay, 34-mm Ø body, 65-kg maximum thrust, absorption 2 A at 12 V, speed 4 mm/sec at 12 V, 6 mm/sec at 24 V. Fitted with aluminium body and stainless steel telescopic stem, water resistant IP65. Total or partial hatch opening in all desired positions.They cannot be mounted in pairs.
-
Uflex Powered Stay For Hatches Type Model Ulysses Designed For Light Loads Ulysses stay for hatches 12 V 300 mm
310,00 €Electrical linear single mounting stay, 34-mm Ø body, 65-kg maximum thrust, absorption 2 A at 12 V, speed 4 mm/sec at 12 V, 6 mm/sec at 24 V. Fitted with aluminium body and stainless steel telescopic stem, water resistant IP65. Total or partial hatch opening in all desired positions.They cannot be mounted in pairs.
-
Uflex Powered Stay For Hatches Type Model Ulysses Designed For Light Loads Ulysses stay for hatches 24 V 180 mm
300,00 €Electrical linear single mounting stay, 34-mm Ø body, 65-kg maximum thrust, absorption 2 A at 12 V, speed 4 mm/sec at 12 V, 6 mm/sec at 24 V. Fitted with aluminium body and stainless steel telescopic stem, water resistant IP65. Total or partial hatch opening in all desired positions.They cannot be mounted in pairs.
-
Uflex Powered Stay For Hatches Type Model Ulysses Designed For Light Loads Ulysses stay for hatches 24 V 300 mm
310,00 €Electrical linear single mounting stay, 34-mm Ø body, 65-kg maximum thrust, absorption 2 A at 12 V, speed 4 mm/sec at 12 V, 6 mm/sec at 24 V. Fitted with aluminium body and stainless steel telescopic stem, water resistant IP65. Total or partial hatch opening in all desired positions.They cannot be mounted in pairs.