Marco Expantion Tank EXPANTION TANK
Stainless steel expantion tank for autoclaves pumps. Reduces the frequency of engagement and disengagement by reducing the current consumptionand the wear of the pump capacity lt. 2.1 fittings 1/2 gas.
Showing 4481–4512 of 21730 results
-
-
Marco Gas Fog Horn GAS FOG HORN
Gas fog horn complete with plastic trumpet stainless steel base and 750 ml bottle containing non-inflammable gas ozone friendly HFA non flammable (134A) homologation R.I.Na. ELE / 80596/01. Suitable for boats between 12 and 50 m. length. R.I.Na. approval ELE/80596/01. Admitted in substitution ofthe bell on the craft of less than 50 meters. (D. L….
-
Marco High-pressure Washdown Kit MARCO high-pressure washdown kit
Ideal for washdown operations with fresh and salt water.Includes:- high-pressure self-priming electropump- 15-m extensible hose- snap-in spray nozzle, jet lock, check valve and trigger to adjust the flow.
-
Marco Horn With Transfer Wire Passage 12V ELECTROMAGNETIC HORN
Electromagnetic horn in stainless steel with fixing bracket. Retractable cable passage powerful and clear sound stainless steel fixing support and stainless steel membrane
-
Marco Horn With Transfer Wire Passage 24V ELECTROMAGNETIC HORN
Electromagnetic horn in stainless steel with fixing bracket. Retractable cable passage powerful and clear sound stainless steel fixing support and stainless steel membrane
-
Marco Imo Approved Marine Horns IMO APPROVED MARINE HORNS 24V 1 5A
IMO approved marine hornselectronic whistle complete with loudspeaker built-in membrane controlpanel and electronic controller. New ultrasonic heating system forimproved acoustic membrane performance. Meets COLREG 1972 IMOclass IV international regulations with RINA LLOYD�S REGISTER MCA BUREAU VERITAS NMMA and BSH homologations. For vesseles between12m and 20m in lenth. Includes mounting kit. Sound level 122 dB 690…
-
Marco Imo Approved Marine Horns IMO APPROVED MARINE HORNS 24V. 20A
IMO approved marine hornssignalling whistle complete with chrome plated horn � 200mm length mm. 449. New Italian design base. With electric compressorand mounting accessories. Meets COLREG 1972 IMO class IV regulations.Approvals: RINA LLOYD�S REGISTER MCA BUREAU VERITASand NMMA. For vesseles between 12m and 20m in lenth. 123 dB levelsound 315 Hz. Minimum audibility at sea…
-
Marco Impeller For Up1- Up1-m – Up1/ac Pump IMPELLER FOR UP1- UP1-M – UP1/AC PUMP
Impeller of special nitril rubber. Original spare part for UP1 UP1-M and UP1/AC. Dimensions: 22 x � 51.5 mm – bore � 8 mm.
-
Marco Impeller For Up1-j Pump IMPELLER FOR UP1-J PUMP
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
-
Marco Impeller For Up1-j Pump UP1-J PUMP 12V.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
-
Marco Impeller For Up1-j Pump UP1-J PUMP 24V.
Impeller of special nitril rubber. Original spare part for UP1-J. Dimensions: 22 x � 40.5 mm – bore � 8 mm.
-
Marco Multifunction Electronic Horn/whistle Electronic multifunctional horn/whistle 112dB 12 V
280,00 €Functions: – Horn – VHF input – Automatic fog signal – Microphone. Includes water-proof speakers, stainless steel bracket, control microphone, type-approved for boats up to 12 metres.
-
Marco Multifunction Electronic Horn/whistle Electronic multifunctional horn/whistle 112dB 24 V
295,00 €Functions: – Horn – VHF input – Automatic fog signal – Microphone. Includes water-proof speakers, stainless steel bracket, control microphone, type-approved for boats up to 12 metres.
-
Marco Oil Change Kit With Bronze Gears Marco oil changing kit bronze gears 12 V
180,00 €The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
-
Marco Oil Change Kit With Bronze Gears Marco oil changing kit bronze gears 24 V
180,00 €The kit includes:a) Filling/draining pump with ON-OFF reversible switch.b) Intake tubes.c) Battery clips.
-
Marco Oil Transfer Electric Pump With Bronze Gears MARCO oil transfer electric pump with bronze gears
365,00 €Self-priming electric pump with bronze gears for oil transfer. Protection strainer included.
-
Marco Only Horn For Articles 3838512/24 IMO APPROVED MARINE HORNS 24v. 1 5A
Only horn for articles 3838512/24
-
Marco Only Horn For Articles 3838512/24 ONLY HORN FOR ARTICLES 3838512/24
Only horn for articles 3838512/24
-
Marco Pipe Kit Pipe kit
15,00 €8-mm and 6-mm rigid rilsan pipe kit for tapping through the dipstick. For pump models 16.190.xx.
-
-
Marco Pump Gear Up6 PUMP GEAR UP6 12 V.
Self-priming electric pumpPTFE with bronze gears and for the transfer gasoline non-flammable liquids. Complete with in-line filter brass body. Self priming mt. 1 5. Not for oil.
-
Marco Pump Up6/e-dx 12/24 V PUMP UP6/E-DX 12/24 V
Self-priming autoclave pump with two electronically controlled electric pumps. Motor speed in relation to the required flow rate. Reduced consumption and noise. They eliminate the expansion tank. Self-protected against voltage overloads. The operating status of the pump can be monitored by means of 2 luminous LEDs. End of water block device.
-
Marco Pump With Bronze Gears Ock1-e PUMP OCK1-E 12/24 V.
Pump with bronze gears for diesel transfer equipped with an ELECTRONIC CONTROL panel which guarantees the reversibility of the flow direction the variable speed of the engine in relation to the viscosity of the liquid and the automatic locking at the end of emptying. Complete kit with pliers protection fuse accessories and 20 mm screened…
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 12 V 28 l/m
101,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 12 V 35 l/m
140,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 12 V 45 l/m
165,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 24 V 35 l/m
140,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bilge Pump Marco self-priming bilge pump 24 V 45 l/m
165,00 €Rubber impeller, high-quality built, EMI internal noise suppressor. Waterproof body and watertight fairlead. In compliance with ISO 8849/8846 standards.
-
Marco Self-priming Bronze Electric Gear Pump For Diesel Oilantifreeze And Water Transfer Self-priming electric pump 12 V 15 l/min
140,00 €Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
-
Marco Self-priming Bronze Electric Gear Pump For Diesel Oilantifreeze And Water Transfer Self-priming electric pump 12 V 26 l/min
215,00 €Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
-
Marco Self-priming Bronze Electric Gear Pump For Diesel Oilantifreeze And Water Transfer Self-priming electric pump 24 V 26 l/min
215,00 €Fitted with in-line inlet strainer. Brass body, stainless steel shaft. Inlets with brass fittings for 14-mm inner Ø hose. It can run dry without damage.
-
Marco Self-priming Electric Gear Pump For Oil Transfer/change MARCO electric gear pump for oil change 12 V
115,00 €Bronze electric gear pump for transferring oils and viscous fluids. Tapping through the dipstick, fitted with 2 hose adaptors for 14-mm inner diameter hose and additional quick plug-in fitting for the suction pipe. Suitable for draining oil from engine sumps by means of its hose kit. Nickel-plated brass body, stainless steel shaft.