– Chromed Brass Flush Mount Fuel Vent Fuel vent chromed brass elbow 90° left 16 mm
25,00 €Fuel vents. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
Showing 1–32 of 35 results
-
-
– Chromed Brass Flush Mount Fuel Vent Fuel vent chromed brass elbow 90° left 20 mm
34,00 €Fuel vents. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
– Chromed Brass Flush Mount Fuel Vent Fuel vent chromed brass elbow 90° right 16 mm
25,00 €Fuel vents. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
– Chromed Brass Flush Mount Fuel Vent Fuel vent chromed brass elbow 90° right 20 mm
34,00 €Fuel vents. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
– Chromed Brass Flush Mount Fuel Vent Fuel vent chromed brass elbow straight 20 mm
27,00 €Fuel vents. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
– Chromed Brass Flush Mount Fuel Vent Fuel vent chromed brass straight 16 mm
21,00 €Fuel vents. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
– Chromed Brass Fuel Vent Anti-spray fuel vent chromed brass
20,00 €Splash-proof screen protection. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
– Chromed Brass Fuel Vent Fuel tank vent chomed brass
19,00 €Splash-proof screen protection. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Anti-froth Funnel To Be Connected To The Fuel Filler Cap Anti-Froth funnel to be connected to the fuel filler cap
65,00 €Designed to prevent foam and fuel overflowing when refuelling. The device causes the foam to turn back into liquid, which then flows to the tank.
-
Attwood Special Fuel Vent ATTWOOD special fuel vent
17,00 €16-mm 90° hose adaptor and vent fitted with valve to totally prevent water from getting into the hull. Nylon body, polished stainless steel outer part. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati 90° Fuel Vent Made Of Stainless Steel Wire Flush SS fuel vent head 50 mm
34,00 €Designed with a patented system, it is perfectly flush with the bulkhead and can be adjusted right or left. Chromelux finish. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati 90° Fuel Vent Made Of Stainless Steel Wire Flush SS fuel vent head 66 mm
25,00 €Designed with a patented system, it is perfectly flush with the bulkhead and can be adjusted right or left. Chromelux finish. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati 90° Fuel Vent Made Of Stainless Steel Wire Flush SS fuel vent head 66 mm hose adaptor 19 mm
35,00 €Designed with a patented system, it is perfectly flush with the bulkhead and can be adjusted right or left. Chromelux finish. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Cast And Mirror Polished Aisi316 Stainless Steel Fuel Vents 90° fuel vent mirror polished AISI 316 45 mm
34,00 €Fitted with flame-proof screen, detachable for easy maintenance. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Cast And Mirror Polished Aisi316 Stainless Steel Fuel Vents 90° fuel vent mirror polished AISI 316 49 mm
47,00 €Fitted with flame-proof screen, detachable for easy maintenance. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Cast And Mirror Polished Aisi316 Stainless Steel Fuel Vents Straight fuel vent mirror polished AISI 316 45 mm
33,00 €Fitted with flame-proof screen, detachable for easy maintenance. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Cast And Mirror Polished Aisi316 Stainless Steel Fuel Vents Straight fuel vent mirror polished AISI 316 49 mm
39,00 €Fitted with flame-proof screen, detachable for easy maintenance. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Chromed Brass Fuel Vents With 90° Hose Adaptor Fuel vent chromed brass elbow 90° left 16 mm
23,00 €Fitted with flame-proof screen. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Chromed Brass Fuel Vents With 90° Hose Adaptor Fuel vent chromed brass elbow 90° right 16 mm
23,00 €Fitted with flame-proof screen. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Ecologic Device To Be Fitted Along The Fuel Vent Piping System Ecologic device to be fitted along the fuel vent piping system
20,00 €It lets only air out and blocks the fuel when it arrives, therefore it eliminates the streaks of fuel on the boat sides.When fuel is near this device, the hiss of the passing air stops to indicate that the tank is full.
-
Osculati Elbowed Fuel Vent Elbowed fuel vent
11,00 €Made of nylon, fitted with double internal screen. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Flush-mount Fuel Vent Made Of Stainless Steel Flush-mount fuel vent made of stainless steel
35,00 €With flame-resistant grid. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Fuel-lock Vent With Trap To Prevent Water To Flow Back Fuel-Lock vent with trap to prevent water to flow back
41,00 €Fuel-Lock lets air but not fuel out. Fuel is locked inside by a trap system that removes marine pollution and streaks on the side.An internal bulkhead device also avoids water to reach the tank through the vent. Polished AISI 316 stainless steel external element, hydrocarbon-resistant copolymer polypropylene internal element.
-
Osculati Full Flush Chromed-brass Fuel Vent Full Flush chromed brass fuel vent 90° Ø 16 mm
32,00 €The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Full Flush Chromed-brass Fuel Vent Full Flush chromed brass fuel vent 90° Ø 19 mm
33,00 €The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Full Flush Chromed-brass Fuel Vent Full Flush chromed brass fuel vent straight Ø 16mm
28,00 €The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Full Flush Chromed-brass Fuel Vent Full Flush chromed brass fuel vent straight Ø 19mm
28,00 €The vent is located in the lower part for a completely closed design. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Mirror Polished Aisi 316 Stainless Steel Fuel Ventfitted With Anti-flood System Mirror polished AISI 316 stainless steel fuel vent, fitted with anti-flood system
22,00 €Fitted with fire- and flood-proof screen. Made of nickel-plated micro-pore bronze. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Mirror Polished Stainless Steel Fuel Vent 90° Fuel vent mirror polished SS 16 mm
28,00 €Fitted with fire-proof screen and hose adaptor. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Mirror Polished Stainless Steel Fuel Vent 90° Fuel vent mirror polished SS 19 mm
34,00 €Fitted with fire-proof screen and hose adaptor. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Mirror Polished Stainless Steel Fuel Vent Straight fuel vent mirror polished SS 16 mm
23,00 €Fitted with fire-proof screen and hose adaptor. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
-
Osculati Mirror Polished Stainless Steel Fuel Vent Straight fuel vent mirror polished SS 19 mm
27,00 €Fitted with fire-proof screen and hose adaptor. Designed in compliance with the requirements of the UNI EN ISO 21487 regulation.
Patented Cables Series Ultraflex Machtm Cable MACH5 19 
Osculati Marinco Cable With Plugs Cable w/ Marinco plug 16 A 15 m 
Lofrans Kill Cords Kill cord for Mercury/Mariner engines 
Osculati Ignition Safety Cut-off Device (complying With Regulations) Cutoff + safety key 
Lofrans Kill Cords Kill cord for new Honda outboard engines 
Lofrans Kill Cords Kill cord for Mariner/Suzuki engines 4 strokes 
Osculati Safety Key Kit For Outboard Engines Safety key kit for outboard engines